Hand-crafted in America, Oasis is the best solution to the challenge of guitar humidification. Whether you play a flat top steel string or a nylon string classical guitar, you have made a significant investment in a quality instrument. It is far less expensive to have an effective, easy to use guitar humidifier than it is to repair a cracked guitar. Give Oasis a try and you will see how well it works!
The body of Oasis® is made from a specially designed fabric that allows water vapor (but not water) to pass through it. As the vapor transmission takes place, a vacuum is created and Oasis® shrinks to compensate for the loss of water. By watching the Oasis® shrink, you can determine when it is ready for refill. When refilling, you don't have to guess when it is full. Simply unscrew the black cap, fill with water to the top of the container and replace the cap. Once sealed, the water tight container is your first line of defense against leaks. Humigel™, the super absorbent polymer crystals inside Oasis™, are your second line of defense. Humigel™ captures up to 500 times its weight in water in an absorbent gel matrix.
- You can see when Oasis® is ready for refill
- Long lasting humidification
- Won't leak due to overfilling
- Two levels of leak protection
- Stabilized to Never Touch the Body of Your Instrument
The Oasis Case Humidifier:
The huge success of our original Blue Oasis "sound-hole" humidifier has brought many inquiries about ways to provide humidification for other instruments including violins, violas, cellos, mandolins, ukuleles, jazz guitars and guitars with flat top cases.
After careful consideration, we decided that the best approach to solving this challenge was to develop a humidifier that attaches to the inside of the instrument case. Finding a secure way to attach the humidifier to the inside of the case, and still have it easily removed and re-attached, was no small challenge.
Starting with our proven technology, the Blue Oasis® humidifier, we inserted two neodymium magnets in the seam of the humidifier*. The magnets then attach to the instrument case using either a steel belt style clip or a stainless steel strip with adhesive backing. The belt style clip fits over the side of the case and provides a flat vertical surface for the magnets to adhere. The adhesive backed stainless steel strip allows for either vertical or horizontal attachment anywhere there is a flat surface inside the case**. An advantage of this type of humidifier is the flexibility to position the humidifier in a wide variety of locations within your instrument case.
Compare with Other Guitar Humidifiers
|Ability to See When Refilling is Needed||YES||NO||NO|
|Screw Off Cap Refilling||YES||NO||NO|
|Long Lasting Refills||YES||YES||NO|
|Soft Exterior Material||YES||NO||YES|
|Never Touches The Body|
Of Your Instrument
|Water Absorbent Material Is|
Entirely Enclosed In Humidifier
|Weight Distribution of Humidifier|
Supported by More Than 3rd and 4th Strings